The inside parts were made from 3/4" Baltic Birch plywood
The outside part was made from 1/4" Masonite
The cutter was made from a section of old hacksaw blade and was attached using 2 part epoxy.
Putting a piece of veneer under the blade aides in cutting off the tape.
Type | Length | Width | Thickness | Origin |
---|
Name | Type | Tool | Feedrate | Plungerate | Cut Depth |
---|
Type | Length | Width | Thickness | Origin |
---|
Name | Type | Tool | Feedrate | Plungerate | Cut Depth |
---|