Setup Sheet

Project Title: Lego Wall Tool Holder
Designer: dmstone7
Project Source: Carbide Create
Project udpated: 01/05/2021

Notes:

This is made with MDF cut can easily be made with plywood or any other wood. I used 1/2" MDF for the Wall Plates and 3/4" MDF for the lego pieces. They need to be cut on both sides of the board and the plans include 2 holes that can easily allow for taking off the piece and turning it over and cutting the other side. The pieces are a bit loose to allow for some play and hold very well with a bit of wood glue.

Setup 1 of 5

Material Details

Type Length Width Thickness Origin

Toolpaths

Name Type Tool Feedrate Plungerate Cut Depth
Setup 2 of 5

Material Details

Type Length Width Thickness Origin

Toolpaths

Name Type Tool Feedrate Plungerate Cut Depth
Setup 3 of 5

Material Details

Type Length Width Thickness Origin

Toolpaths

Name Type Tool Feedrate Plungerate Cut Depth
Setup 4 of 5

Material Details

Type Length Width Thickness Origin

Toolpaths

Name Type Tool Feedrate Plungerate Cut Depth
Setup 5 of 5

Material Details

Type Length Width Thickness Origin

Toolpaths

Name Type Tool Feedrate Plungerate Cut Depth

Project Images