Setup Sheet

Project Title: Philips Hue Go Stand
Designer: nlichtenberg
Project Source: Carbide Create
Project udpated: 09/28/2020

Notes:

I used the following magnets to assemble the cylinder where the Hue Go goes in: https://www.amazon.de/gp/product/B07XRB2MM3/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

The stock used (oak) was 26.5 mm thick. This leaves enough space for the lamp itself. If you have thinner stock, you will need an additional layer to create the cylinder.

Setup 1 of 3

Material Details

Type Length Width Thickness Origin

Toolpaths

Name Type Tool Feedrate Plungerate Cut Depth
Setup 2 of 3

Material Details

Type Length Width Thickness Origin

Toolpaths

Name Type Tool Feedrate Plungerate Cut Depth
Setup 3 of 3

Material Details

Type Length Width Thickness Origin

Toolpaths

Name Type Tool Feedrate Plungerate Cut Depth

Project Images