Setup Sheet

Project Title: Wooden Pen Case
Designer: wsmoy
Project Source: Carbide Create
Project udpated: 04/20/2020

Notes:

Requires a 1/8" square endmill, and 1/4" ball endmill.

Assumes you're starting from 3/4" (typically 0.72-ish) and 1/2" stock. You may want to adjust the stock and cut depths if your lumber is different.

Setup 1 of 2

Material Details

Type Length Width Thickness Origin

Toolpaths

Name Type Tool Feedrate Plungerate Cut Depth
Setup 2 of 2

Material Details

Type Length Width Thickness Origin

Toolpaths

Name Type Tool Feedrate Plungerate Cut Depth

Project Images