Setup Sheet

Project Title: Shapeoko XL Wasteboard
Designer: edwardrford
Project Source: Carbide Create
Project udpated: 12/17/2019

Notes:

Open this file in Carbide Create (v420 or higher required).

The grid is set to 2" x 4" (with offsets on the bottom and sides to center the hole pattern). You can use this default grid, or if you are looking for something a little less dense, feel free to delete entire rows or columns of holes through the editor.

Toolpaths applied to the design file are for the holes only. It is suggested you pre-cut the piece of MDF to the dimensions shown, then take the time to horizontally center the board on your machine when placing it all the way to the front edge (touching the front plate).

Threaded inserts (and hex driver) are available through the Carbide 3D store: https://shop.carbide3d.com/collections/accessories/products/threaded-inserts-qty-100

Setup 1 of 1

Material Details

Type Length Width Thickness Origin

Toolpaths

Name Type Tool Feedrate Plungerate Cut Depth

Project Images