Setup Sheet

Project Title: casket
Designer: albert48
Project Source: Carbide Create
Project udpated: 05/02/2019

Notes:

I could not load G-code e, the system does not allow, as a tool I used an end mill 3.175mm. With this cutter it turns out to assemble without glue, into an interference fit
thank

Setup 1 of 4

Material Details

Type Length Width Thickness Origin

Toolpaths

Name Type Tool Feedrate Plungerate Cut Depth
Setup 2 of 4

Material Details

Type Length Width Thickness Origin

Toolpaths

Name Type Tool Feedrate Plungerate Cut Depth
Setup 3 of 4

Material Details

Type Length Width Thickness Origin

Toolpaths

Name Type Tool Feedrate Plungerate Cut Depth
Setup 4 of 4

Material Details

Type Length Width Thickness Origin

Toolpaths

Name Type Tool Feedrate Plungerate Cut Depth

Project Images