Setup Sheet
- Project Title: Suckit Dust Boot 35mm Hose Adapter
- Designer: SouthTampaWoodworks
- Project Source: Carbide Create
- Project udpated: 05/02/2019
Notes:
The file is set up for .73 depth of cut, which should work for most 3/4" plywood.
We used a 60 degree VBit from Amana tools for the Vcarved letters, obviously that is not required and you can disable that toolpath to save time.
The adapter itself was cut out with 1/8" endmill. Feeds and Speeds have been updated. If you are not comfortable running above stock speeds, you can reset them to default, but those are the speeds we used.
Have questions? Hit us up on IG. https://www.instagram.com/south_tampa_woodworks/
-Freddy
South Tampa Woodworks
