My take on the balance board

Project By: DanoInTx


xxl balanceboardremake plywood

My take on the balance board project shown here:
https://cutrocket.com/p/5ab1d470771f8/
Originally by https://cutrocket.com/u/neilferreri

I saw this design and had to roll my own;) This one teeter totters all the way around.

Design Info

Machine
    Material

    Cutters

    Notes from the author about this project.


    Cut from 24"x24"x3/4" plywood using 1/4" single flute straight bit. Personalize as desired. I originally cut this using VCarve Desktop and used a 90 degree V bit to do a "quick engrave" which gave me a checkered texture for the foot prints, I have not added this to the C2D file, just a V carved outline.
    {makes}

    Be the first to leave a comment!
    you must be signed in to leave a comment




    Other Projects by DanoInTx


    Other Projects