Porcupine Shaped Piggy Bank

Created by - edwardrford

Date Created - 2018-02-03

Last Update - 2019-05-02 17:36:12

Status - published

This is a 3 piece design. Each piece was cut from 3/4" poplar, then glued and clamped together. The windows were cut from .080" acrylic, which were then superglued to the circular pockets on either side of the porcupine.

Painting was done by hand with a hobby airbrush.

Type Length Width Thickness Job Zero
Name Type Tool Feedrate Plungerate Cut Depth